My Account

Wish List (0)

Keyes 34 Piece Sensor Experiment Kit

Product Code:MMP-0211

£34.00
Ex.Tax £28.33

Availability: 46

Keyes 34 Piece Sensor Experiment Kit
Keyes 34 Piece Sensor Experiment Kit
Questions2 Answers2 | Expand All
Connection Details
Would you please provide me connection details for each of these devices. Thanks. William Wood
William
How to connect to Raspberry Pi
Forgive my ignorance, but I want to buy this for my sone so don't want to solder anything. How do I connect these sensors to the Pi and can I connect multiple at a time to combine functionality?
Ian Booth
  • You will want to look at getting some jumper wires - https://www.modmypi.com/electronics/jumper-wires

    Which gender jumper wires you get will depend on how you are connecting the sensor. If you are going from the sensor directly to the Pi then you will want Female to Female. If you are going to plug the sensor into a breadboard, and then go from the breadboard to the Pi, you will want Male to Female.

    There is a really nice breakdown on the sensors included in the kit here - https://forum.modmypi.com/sensors/choosing-the-right-iot-sensor-kit-for-a-class-t1763.html?hilit=ADC#p7694
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 2 of 2 (1 pages)

The Keyes 34 piece sensor experiment kit adds an enormous amount of variety and additional fun to every Maker's toolbox! The kit features a range of assorted sensors, detectors, switches and emitters. If you've ever fancied wiring up a and experimenting with a host of different sensors, then this is the kit to do it! The kit is suitable for use with most microcontrollers including Arduino and Raspberry Pi, and there's a large amount of information (including example code) for use on both systems, which is available at the bottom of the page!

Each sensor is pre-assembled, so there's no soldering required, the kit comes in a neat compartment clip together plastic box, so you can order and store all the sensors safely. There's even a cheat sheet included in every box that has the name and picture reference for each sensor.

Please Note. There were originally 37 sensors in this kit, however three have been removed: The tilt sensor and light cup sensor contain a small ball or mercury (which cannot be shipped within the UK), and the laser emitter, which we suspect is greater than 125mW (class 3) cannot be sold within the UK.

The kit includes the following sensors:

  • XY Joystick Module
  • Flame Sensor
  • RGB 3 Colour LED Module
  • Heartbeat
  • Hall Magnetic
  • Relay
  • Linear Hall Sensor
  • SMD RGB
  • 7 Colour Flash
  • One Wire Temperature Sensor (TEMP)
  • Loud Sound Detector (Big Sound)
  • Touch Switch (Touch)
  • Two Colour 5mm
  • Rolling Ball Tilt Switch (Ball Switch)
  • Analog Temperature
  • Quiet Sound Detector (Small Sound)
  • Digital Temperature
  • Two Colour 3mm
  • PCB Mounted Push Button (Button)
  • LDR Light Sensor (Photoresistor)
  • IR Emission
  • IR Avoidance Line Follow Sensor (Tracking)
  • Buzzer
  • Reed Switch
  • Shock Sensor
  • Temp and Humidity
  • IR Receiver
  • IR Reflection Sensor (Avoid)
  • Passive Buzzer
  • Mini Reed
  • Rotary Encoder
  • Magnetic Field Detector (Analog Hall)
  • Vibration Sensor (Tap Module)
  • Light Beam Break Sensor (Light Blocking)

Resources

The Keyes 34 Pieces sensor kit is very popular, and there are a range of resources available

Write a review

Name

Your Review

Note: HTML is not translated!

Rating

Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.