Be the first to ask a question.
The Raspberry Pi Compute Module 3+ (CM3+) is a DDR2-SODIMM-mechanically-compatible System on Module (SoMs) containing the same processor, memory, and supporting power circuitry as the Raspberry Pi 3+.
The CM3+ updates the CM3 design with the updated thermal design and processor package used in the Pi3 Model B+.
There are 4 versions of the CM3+ board: the Lite version which has no on-board eMMC memory and 3 versions with 8GB, 16GB or 32GB eMMC memory
This purchase is for the CM3+ Lite
Compute modules allow designers to leverage the Raspberry Pi hardware and software stack in their own custom systems and form factors. In addition the modules have extra IO interfaces over and above what is available on the Raspberry Pi boards, providing more options for the designer. The Raspberry Compute Modules are suitable for designers who are happy with Raspberry Pi 3B+ functionality but require a smaller form factor (67.6 mm x 31 mm) for their embedded designs.
Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837B0 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi), and designing the Module into a custom system should be relatively straightforward as all the tricky bits are pre-built into the module.
The Compute Module 3+ contains the following components contained within a 200 pin SODIMM design:
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.