My Account

Wish List (0)

Saved Carts


Approved Re-Seller
Follow us on Facebook! Follow us on Twitter! Follow us on Instagram!


Servo Motor - Futaba S3003 Multi-Purpose Standard Size

Product Code: MMP-0259

Ex.Tax £5.83



In Stock: 18

Servo Motor - Futaba S3003 Multi-Purpose Standard Size
What's The Difference Between DC, Servo & Stepper Motors? What's The Difference Between DC, Servo & Stepper Motors? Aug 25, 2013 25/08/2013 Need a motor for your project, but not sure which type to get? We stock a few different varieties on ModMyPi, so hopefully this rundown on the dif..
The Futaba S3003 is a great multi-purpose standard-size high reliability servo, and it can be easilly modified for continuous rotation. Features plastic gearing, so these are not suitable for high impact applications, but they're a great choice for beginners - perfect for moving a robotic arms through a certain range or steering a rover! Please don't stick this type in your 70mph 4x4 off-road RC buggy and moan if they don't work as intended! We do stock metal geared, high torque servo's for more intensive applications. 
The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec.
This servo can rotate approximately 180 degrees (90 in each direction), but can be modified for full rotation, and comes with a range of horns and hardware to suit most applications! You can use any servo code, hardware or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. They work great with Adafruit's 16 Channel Servo Driver, and other Raspberry Pi Motor Controllers. 
The Futaba S3003 Multi-Purpose Servo Features:
  • Genuine Futaba Product
  • Includes Selection of Horns and Screws for  Different Application - See Picture for Details.
  • 360 Modifiable 
  • Operating Voltage: 4.8 to 6.0V
  • Operating Temperature Range: -20℃ to 60℃
  • Operating Speed: 60/0.23 degree/second (No Load @ 4.8V)
  • Operating Speed: 60/0.19 degree/second (No Load @ 6.0V)
  • Stall Torque 3.2kg/cm @ 4.8V
  • Stall Torque 4.1kg/cm @ 6.0V
  • Current Drain: 7.2mA/idl @ 4.8V
  • Current Drain: 8mA/idl @ 6.0V
  • Gear Type: All Nylon Gears
  • Control System: +Pulse Width Control 1520usec Neutral
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Direction: Counter Clockwise/Pulse Traveling 1520-1900use
  • Motor Type: 3 Pole Ferrite
  • 30cm Wire Assembled
  • Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
  • Weight: 1.3oz. (37.2g)
Wiring Guide:
Red: Battery Positive  
Black: Battery Negative  
White: Signal
Product Video
How to Modify a Futaba S3003 Servo for Continuous Rotation
Reviews about Servo Motor - Futaba S3003 Multi-Purpose Standard Size
Average rating: 0 reviews
Total reviews: 0
Write your own review on this product.
Write review
Sort By 

Write a review


Your Review:
25-3000 characters
Note: HTML is not translated!

Add prosAdd cons

are you happy?

please confirm the selections below are correct


Foul Language
Other (write below)