My Account

Wish List (0)

Raspberry Pi Zero Wireless

Available Options

Product Code:ZEROKIT-B

Ex.Tax £7.58

Availability: 460

Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Raspberry Pi Zero Wireless
Questions5 Answers5 | Expand All
Specification of requirement
Please can you help with the spec I need to order as per request below: • Raspberry Pi Zero W • Standard Camera Module for Raspberry Pi Zero • Heatsink for Raspberry Pi Zero W • USB Power Bank/Battery (ideally over 6000mAh in capacity) • USB charger for charging the power bank • 16GB Micro SD Card • Micro USB cable I am not sure what options I need, please can you help me.
Jyoti Bhundia
  • For sales support, please contact us via our contact page - or post on our forums - 

    Was this answer helpful? 0
What Wi-Fi standard does this run?
Is the Wi-Fi dual band and what standard of 802.11 is it?
Gareth Faulkner
  • 802.11 b/g/n wireless LAN
    Single band 2.4GHz
    ModMyPi LTD
    Was this answer helpful? 0
Recommended Fisheye case
Will the official Raspberry Pi Zero 'Red & White' case accommodate a fisheye camera board? If not, can you recommend one that does?
  • The Official RPi Zero case will only house the official Raspberry Pi Camera Module. You'll need to find a camera module/lens that has a case specifically designed for it.
    ModMyPi LTD
    Was this answer helpful? 0
When will be possible to order multiple units?
I do not need your pre-soldered header version and it's sold out.
Ondrej Patka
  • Not for the foreseeable future.
    ModMyPi LTD
    Was this answer helpful? 0
When will be possible to order multiple units?
Ondrej Patka
  • You can buy multi units of our pre-soldered header version -
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 5 of 5 (1 pages)

Maximum 1 Unit Per Order. If you require Raspberry Pi Zero Wireless in bulk, we allow quantity purchases of the Raspberry Pi Zero Wireless with pre-soldered headers!

The Raspberry Pi Zero Wireless has landed at ModMyPi! The Raspberry Pi Zero is an ultra low cost and ultra small variant of the original Raspberry Pi. It's tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, prototyping and any other Pi based tinkering you can think of, on a micro scale! The Raspberry Pi Zero Wireless features on board Wireless Internet & Bluetooth for all your connectivity needs!

The Raspberry Pi Zero Wireless comes with an unpopulated GPIO, and in most cases, requires the user to solder on an optional 40 Pin Male GPIO Header. If you want to jump straight into your project without any messy soldering, we now offer the Raspberry Pi Zero  Wireless with a pre-soldered header!

Our Pi Zero Kit lets you fully tailor your Pi Zero to you! Each kit has the following optional components. We've added the most commonly required components by default (e.g. Micro SD Card, Power Supply), if you don't want them simply de-select them from the drop down, and whilst you're here, why not check out our range of Pi Zero breakout boards:

The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there's plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B+/A+, which you'll need to solder your own headers to. With it's small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!

Unlike it's larger brothers and sisters, the Raspberry Pi Zero has an unpopulated GPIO, unpopulated composite (RCA) header and an unpopulated reset header. There's also no DSI screen port, no ethernet, no analogue audio and no full sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video. 

HAT Compatibility Note: The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+

Raspberry Pi Zero Wireless Features:

  • BCM2835 chipset, Overclocked to 1Ghz 
  • 512MB RAM
  • Tiny Form Factor: 65mm x 30mm x 5mm
  • Fully HAT compatible
  • 40pin GPIO (Unpopulated)
  • Stream and watch Hi-definition video output at 1080P
  • Micro SD Slot for OS 
  • Tiny Current Draw ~ 140mA at 5V!
  • Mini-HDMI for Video
  • Micro-USB OTG Host for Data
  • Micro-USB for Power
  • Micro-CSI Camera Port
  • On-Board WiFi
  • On-Board Bluetooth


Raspberry Pi Zero Dimension Sheet


Write a review


Your Review

Note: HTML is not translated!


Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.