The Raspberry Pi Zero has landed at ModMyPi! The Raspberry Pi Zero is an ultra low cost and ultra small variant of the original Raspberry Pi. It's tiny, measuring just 65mm x 30mm, and is perfectly designed for embedded applications, wearables, prototyping and any other Pi based tinkering you can think of, on a micro scale!
The Raspberry Pi Zero comes with an unpopulated GPIO, and in most cases, requires the user to solder o 40 Pin Male GPIO Header. If you want to jump straight into your project without any messy soldering, we now offer the Raspberry Pi Zero with a pre-soldered header!
Our Pi Zero Kit lets you fully tailor your Pi Zero to you! Each kit has the following optional components. We've added the most commonly required components by default (e.g. Micro SD Card, Power Supply), if you don't want them simply de-select them from the drop down, and whilst you're here, why not check out our range of Pi Zero breakout boards:
The Raspberry Pi Zero features a BCM2835 chipset, overclocked to 1Ghz with 512MB RAM, and the same 1080p video output, so there's plenty of oomph in that little board. It also features the same 40 pin GPIO layout as the Raspberry Pi 2/B+/A+, which you'll need to solder your own headers to. With it's small form factor and reduction in connectors, the Raspberry Pi Zero only uses ~ 140mA at 5V!
Unlike it's larger brothers and sisters, the Raspberry Pi Zero has an unpopulated GPIO, unpopulated composite (RCA) header and an unpopulated reset header. There's also no DSI screen port, no ethernet, no analogue audio and no full sized USB ports. Instead, the Pi Zero features a micro-USB power port, a micro USB OTG host port (for peripherals e.g. WiFi dongle), and a mini HDMI port for video.
HAT Compatibility Note: The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+
Raspberry Pi Zero Features:
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.