My Account

Wish List (0)

3 Port USB Hub w/ Ethernet - Micro USB (Pi Zero)

Product Code:MMP-0491

£8.99
Ex.Tax £7.49

Out Of Stock

3 Port USB Hub w/ Ethernet - Micro USB (Pi Zero)
3 Port USB Hub w/ Ethernet - Micro USB (Pi Zero)
3 Port USB Hub w/ Ethernet - Micro USB (Pi Zero)
Questions6 Answers4 | Expand All
any configuration required? my lan port not working
Using raspbian ( also musicbox & others ) usb ports work with keyboard dongle lan cable detected ( led goes RED ) i can chain a usb network adapter from one of the hub’s usb sockets and it works okay have tried various power supplies ( up to 3amp ) am i missing some config setting?
mr blackburn
  • The part is essentially plug & play. No drivers required, but it may depend on the OS you're using. If you need technical support, please post on the forums here: https://forum.modmypi.com/ and we'll assist you with set up.

    ModMyPi Ltd
    Was this answer helpful? 0
Use with PiCore Player
Hi everybody. I've tried to use this hub with a PiCore Player setup but it doesn't find the network connection. Do I need to install the drivers manually? Thanks in advance
GBlanco69
What's the actual Ethernet throughput with a Zero on this device?
Jessica
  • If the same as mine, which has a DM9601 chip then the bandwidth measured with iperf is approx. 3.8 Mbits/sec Using an Ethernet adaptor with an AX88179 chip in one of the USB ports in this USB hub then the bandwidth measured with iperf is approx. 50 Mbits/sec Hope this helps.
    Russell
    Was this answer helpful? 0
external power PSU
do i need external power supply to use this and what adaptor do I need?
RD-D2
  • No you don't need an external PSU, this will work as a passive HUB.
    ModMyPi LTD
    Was this answer helpful? 0
Use with Ethernet and UPS
Could this be used with both ethernet and a UPS USB cable so that the Raspberry Pi zero can shutdown if there is a power failure. This is a bit more complex than attaching a mouse or keyboard. Thanks
Alan
Ethernet without extra power?
Has anyone been able to use the ethernet port on this product, without connecting an extra power supply to the adapter? I've tried mine now in two different Pi0 (one regular, one W) without any success. The ethernet link comes up, configures, and then goes down again. Tried both in Raspbian and Kali. Same behaviour. Nothing connected to the USB ports. Using a 3A power supply for the Pi0 (the ones from WD, for their PiDrives). Thanks in advance!
BeO
Showing 1 to 6 of 6 (1 pages)

Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero? You need one of these adaptors! This one comes with a Micro USB B input, so it plugs directly into your Raspberry Pi Zero without the need for adaptors or shims!

The hub has three full size USB inputs, so you can easily add USB peripherals like mice, keyboards and WiFi to your Zero! There's even a plug and play RJ45 Ethernet port, so you can get direct network connectivity for your Zero using this hub!

3 Port USB Hub with Ethernet - Micro USB Features:

  • Fully compatible with the Raspberry Pi Zero
  • Micro USB 2.0 Input Port
  • 3 x USB Ports
  • 1 x RJ45 Ethernet Port (10/100)

Downloads

MMP-0491 Driver Package

Write a review

Name

Your Review

Note: HTML is not translated!

Rating

Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.