My Account

Wish List (0)

UPS PIco Advanced - Uninterruptible Power Supply (HV3.0B+)

Product Code:MMP-0595

£40.00
Ex.Tax £33.33

Out Of Stock

UPS PIco Advanced - Uninterruptible Power Supply (HV3.0B+)
UPS PIco Advanced - Uninterruptible Power Supply (HV3.0B+)
UPS PIco Advanced - Uninterruptible Power Supply (HV3.0B+)
UPS PIco Advanced - Uninterruptible Power Supply (HV3.0B+)
Questions23 Answers16 | Expand All
The 12v terminal block is listed as optional, but there isn't anywhere to order the option in checkout?
Why not just include the 12v terminal board as a standard for the pico? I'd like to order a Pico + with the 12v terminals attached. My soldering skills, well, suck xD I have a 12v monitor my pi is attached to, so I was thinking of putting a splitter, running 12v to the Pico and 12v to the monitor, using a 12v 5A source.
Nick
  • I may have been mistaken. I was referring to the two green terminals shown on the first image of the Pico hat. Is it possible to have those soldered on before delivery?
    Nick
    Was this answer helpful? 0
  • The terminal block add-on isn't something we currently stock. (It also doesn't allow you to power the PIco with a 12v source, it offers a level shiffted 12v serial inteface to the Pi)

    If you want to power your PIco with 12v, then you just need to solder the green terminal blocks, as seen in the product picture. This then allows you to power you PIco from a 7 - 28V source.
    ModMyPi LTD
    Was this answer helpful? 0
Support for Rapsberry pi zero W
Is Pico UPS supported for Rapsberry pi zero W? Can it be installed besides pi zero to have minimal device thickness? Does it has alarm notification for low battery ? Need qty- 200 , with LiPO 4000mAH.
Prashant Rai
  • Yes this is compatible with the Pi Zero W. If you want to use the RUN pogo pin (used for restarting the Pi if it crashes and after power resumes) then no, you will need to mount the PIco on top of the Zero.
    ModMyPi LTD
    Was this answer helpful? 0
use as portable power supply
can I used this as a battery solution on a handheld Pi games console?
Clive
  • Yes, however you will need to look at a larger capacity battery for any length of use.
    ModMyPi LTD
    Was this answer helpful? 0
RTC issues
is anyone else having issues with the PICO UPS and real time clock usage. It was working fine for a while and now I'm receiving "read errors" when viewing dmesg. And when attempting "sudo hwclock -r", I get an error stating "ioctl(RTC_RD_TIME) to /dev/rtc to read the time failed: Remote I/) error". Any ideas?
Karl Siegert
  • For technical support, please visit our forums - https://forum.modmypi.com/ or PiModules forums - http://pimodules.com/technical-support 

    ModMyPi LTD
    Was this answer helpful? 0
Can Advanced version function as true UPS?
My Raspberry Pi based robot runs carries 7.2v 5000mAh NiMH based power, and has a 5v switching power supply for the RPi needs. Could I run the 7.2v into the UPS PIco Advanced 7-28v input and have it power the RPi continuously as a true UPS (eliminating the 5v switching PS)?
Alan
  • Yes, I don't see why not. The PIco will regulate the power from the external source to 5V to power the Pi, and additionally act as a UPS between the battery & Pi
    ModMyPi Ltd
    Was this answer helpful? 0
Where can I get HV3.0B+ user guide?
So far the only user guide available (145 pages) is for HV3.0 (http://pimodules.com/_pdf/13_0x40_W_UPS_PIco_HV3.0.pdf). Github wiki page does not provide the "155 page guide" that ModeMyPi LTD referenced in their reply to Nick in this FAQ.
Oda
Operating system and software installation
I saw, in the instructions, that it goes over installing the daemon and all other software that runs the Pico, utilizing Rasbian as the OS. Would I follow the same procedure if Raspbian is not the OS installed? Say, for my example, you have berry boot bootloader installed which then loads RetroPie. Would I just load up RetroPie, press F4 to enter the console, and proceed from there?
Nick
  • Yes, but please note, the software has been designed to work with Rasbian, and has not been tested on other OSs.
    ModMyPi LTD
    Was this answer helpful? 0
Shutting down completely
Is there a way to programmatically (or via a service) shutdown the Pi completely where restarting it is accomplished by plugging power back into the Pi's micro USB (just like its started when there isn't a UPS HAT)?
Karl Siegert
  • If there is no mains power to the Pi, the PIco can shutdown the Pi, and completly remove power. When mains power is restored the Pi will power back up by itself.

    If there is mains power, then the only way to truely disconnect the power is by turning off the mains.
    ModMyPi LTD
    Was this answer helpful? 0
Actual installation guide exists?
Do you ever plan on putting together an actual installation instruction guide? The one on the wiki is laughably inadequate. It doesn't tell you what gets soldered where, or how to program the programmable buttons. You have also neglected to include any installation or documentation on the HV3.0B Plus. The amount of actual documentation, provided by the creator of the UPS Pico hat, is really sad.
Nick
If I intend to power my Pico with 12v, is the Bi Stable Relay required?
I'm not exactly sure what the bi-stable relay is, for one. But if I intend to power my pico, say with a 12v 5A power supply, would I need to attach the Bi-Stable relay device to the pcb? It would be nice if there were an extensive installation guide that covered not only where and how to attach the various components, but what exactly they are as well.
Nick
  • No, you don't need the bi-stable relay to power the PIco with an external 12V source. 

    You just need to solder the two pin terminal block, then wire up the + and - lines of your power source to the terminal block.

    https://github.com/modmypi/PiModules/wiki/UPS-PIco-HV3.0-A-Stack-450-Plus - If you scroll down to the second picture, you can see (bottom right of the PIco) the terminal blocks that are labelled "+" and "GN". These are the two you need.
    ModMyPi LTD
    Was this answer helpful? 0
Can the Pico + power both Pi3B+ and the Raspberry Pi 7
Using a 12v power source wired to the Pico, can it provide both power to the Raspberry Pi 7+ touchscreen and to a connected Raspberry Pi 3 B+? And would a beefier 4000mAh battery be recommended for such a setup, in the event of power interruption?
Nick
  • The PIco can supply 5v @ 3A to the Pi, which is more than enough to power the touch screen as well, which uses aprox. 400mA

    A larger battery, as you mentioned, would also be recommended.
    ModMyPi LTD
    Was this answer helpful? 0
What is the PIco model presented in this page ?
Description shows PIco HV3.0B Stack 450 Plus but pictures shows PIco HV3.0A. Moreover, it is said to be compatible with Raspberry Pi 3 B+ but on pimodules website, a new version has been released especially for Pi 3 B+ (UPS PIco HV3.0B+ HAT Advanced). Which is exactly the model presented here ? I'm interested in UPS PIco HV3.0B+ HAT Advanced 450, do you sell it ?
Nanaki
  • This is the latest "Advanced" model: UPS PIco HV3.0B+ HAT Advanced 450
    ModMyPi LTD
    Was this answer helpful? 0
New version supporting B+ fully ?
Is this the new version of Pico that supports fully (not just partially) the Pi 3B+ ?
Alfred Sefis
  • Yes, this is fully compatible with the latest Raspberry Pi 3B+
    ModMyPi LTD
    Was this answer helpful? 0
Multiple serial communication
Is there a possibility to use another device at the same time, which is connected via USB port and using serial communication (24/7)? Also, after cutting off the current, does the device charge RPi until the battery dies or in case of having current again, does it automatically switch back to 230V?
Jan Toman
  • Serial communication with the PIco is only used when updating the firmware. You can use a Serial to USB converter as well.

    You can set the PIco up in 2 ways to handle mains power loss.

    1. PIco will run Pi on battery, until battery is low, then will shutdown Pi
    2. PIco will run Pi on battery, for a user specified amount of time, then shutdown Pi

    If mains power is restored, Pi will be powered from mains again.
    ModMyPi LTD
    Was this answer helpful? 0
How to add external 12v supply to UPS Pico?
Id like to install this in an auto and supply it with 12v from the cars battery. where would that connect to the UPS pico? do I need the terminal board? if so would it connect to the A/D 15v terminal?
David Madej
  • If you take a look at the WiKi - https://github.com/modmypi/PiModules/wiki/UPS-PIco-HV3.0-A-Stack-450-Plus - You'll see a picture of the PIco with some terminal blocks (bottom right, next to the buttons). There is a 2 pin terminal block, and a 3 pin terminal block.

    You'll want to hook up your 12v to the two pin terminal. The left pin is positive, and the right pin is negative.
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 15 of 23 (2 pages)

Please Note. Tighter shipping regulations relating to the shipping of battery products means this item can only be shipped in quantities of up to 2 units via Royal Mail Air services, or up to 4 units via DHL air services. There are no quantity limits to the UK and certain EU destinations via DHL ground services - your shipping options will reflect this. For a full list of available Lithium Battery shipping destinations please click here.

Update! HV3.0B+ now fully compatible with the Raspberry Pi 3 Model B+ (and all previous revisions!) 

UPS PIco HV3.0B+ Stack 450 Advanced is an advanced uninterruptible power supply for the Raspberry Pi A+/B+/2/3, that adds a wealth of innovative power back-up functionality and development features to the innovative microcomputer! The UPS PIco will automatically shut-down your Raspberry Pi if there is a power failure, and can be set to automatically monitor and reboot your Pi once power has been restored!

The UPS PIco HV3.0B+ Stack 450 Advanced features a 5V 3A output, designed for use on the latest Raspberry Pi 3B+, and has the gold reset pin in the correct place!! If you're looking for a fully enclosed solution, we've designed a nifty UPS PIco case!

In addition to all the features contained in the standard UPS PIco, the UPS PIco HV3.0B+ Stack Advanced features the following:

  • Extended Voltage Input 7 - 28V DC - Protected with Zero Voltage Drop Inverse Polarity Protection, PPTC Over-current, and ESD. Ideal for Cars, Trucks, Buses and any industrial high voltage applications.
  • Dynamic Power Tracking (DPT) - Charges the battery according to available input power from 100 mA - 1200 mA. DPT checks the input current every second, and adjusts the charging current based on this value making it ideal for Solar Panel applications.
  • Bi Stable (Zero Power) Relay - With dual separated independent contacts
  • Optical Isolated Input (Opto-Coupler) – Readable as A/D values

The UPS PIco is equipped with a 450mAh LiPO battery specially designed to enable safe shutdown during a power cut. Additionally, this can be easily upgraded to the extended 4000mAh or 8000mAh versions, which enables prolonged use of a Raspberry Pi for up to 16 hours without a power supply connected!

The UPS PIco features an embedded measurement system that continuously checks the powering voltage of the Raspberry Pi. When the cable power on the Raspberry Pi is absent, insufficient, or the device detects a power failure, the UPS Pico automatically switches to the unit’s battery source. The module then continues to check the voltage on the Pi and switches automatically back to the regular cable supply when power is once again available.

The UPS PIco is powered and the battery pack intelligently charged via the GPIO pins on the Raspberry Pi, so no additional cabling or power supply is required. Because the UPS Pico requires no external powering and fits within the footprint of the Raspberry Pi, it is compatible with most cases.

The UPS PIco can also be equipped with an optional Infra-Red Receiver which is routed directly to GPIO18 via the PCB for remote IR operations. Additionally the PIco includes an Automatic Temperature Control PWM FAN controller, and can be equipped with a Micro Fan Kit, which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The UPS PIco is designed to be 100% compliant with HAT standards for the Raspberry Pi and includes a Gold Plated Reset Pin, with install locations for the Raspberry Pi Zero, B+/2 and 3.

Feature List

  • Raspberry Pi HAT Compliant
  • Plug and Play
  • Smart Uninterruptible Power Supply (UPS)
  • Integrated 450mAh LiPO Battery (10-15 Minutes of Power Back-Up)
  • Interrupt Driven Interaction (Low Memory/CPU Use)
  • Software Driven Email Broadcasting
  • Intelligent Automatic Charger w/ Power Tracking
  • No Additional External Power Required
  • Supports LiPo & LiFePO4 (Long Life) Batteries
  • 5V 3A Power Backup for even the most demanding Pi 3 set ups.
  • Integrated Hardware Real Time Clock (RTC) with Battery Back-Up
  • File Safe Shutdown Functionality - Single Button On/Off
  • Raspberry Pi Zero/B+/2/3 Activity Pin
  • PWM FAN Control (Fan Not Included)
  • 3 User Defined LEDs
  • 3 User Defined Buttons
  • Integrated Buzzer for Audible Alerts (Buzzer Included but Not Soldered)
  • Status Monitoring - Powering Voltage, UPS Battery Voltage/Current and Temperature
  • I2C PICo Interface for Control and Monitoring
  • RS232 Raspberry Pi Interface for Control and Monitoring
  • 2-Way XTEA Based Cryptography User Software Protection
  • 2 Level Watch-dog Functionality with FSSD and Hardware Reset
  • Raspberry Pi Hardware Reset Button via Spring Test Pin (Gold Reset Pin Included)
  • Jumpers for Raspberry Pi Pin Functionality Selection
  • Stackable Header for Add-On Boards (Header Included)
  • Boot Loader for Live Firmware Update
  • Integrated ESD-Protected 3 Channel A/D 10 Bit Converters 0-5.2V
  • Integrated ESD-Protected 1-Wire Interface
  • Labelled J8 Raspberry Pi GPIO Pins for Easy Plug & Play
  • Infra Red Receiver Sensor Interface (IR Not Included)
  • Intelligent IR Remote Power ON/OFF if IR receiver installed (Not Included)
  • Upgradable with PIco Add-on Boards
  • Fits Inside Most Existing Cases
  • Events Triggered RTC Based System Actions Scheduler (ON/OFF based on RTC or Events e.g Voltage, RS232 data, A/D, IR)
  • Auxiliary 5V @ 750mA Power Output w/ Battery Backup; PPTC Fuse and Reverse Current Protected
  • The UPS PIco Uses the Following Pins
    • Serial Port (Firmware Updates): GPIO14 (Pin8) & GPIO15 (Pin10)
    • i2c Port: GPIO2 (Pin3) & GPIO3 (Pin5)
    • Pulse Train: GPIO27 (Pin13) & GPIO22 (Pin15)

UPS PIco Advanced Additional Features:

  • Bi Stable (Zero Power) Relay - With dual separated independent contacts
  • Optical Isolated Input (Opto-Coupler) – Readable as A/D values
  • Extended Voltage Input 7 - 28V DC Protected with Zero Voltage Drop Inverse Polarity Protection, PPTC Over-current, and ESD
  • Dynamic Power Tracking (DPT); charges the battery according to available input power from 100 mA - 1200 mA. DPT checsk the input current every second, and adjusts the charging current based on this value making it ideal for Solar Panel applications.

Optional Extras (Not Included)

  • 4000mAh, 8000mAh or 12000mAh batteries; available for up to 32 Hours Run-Time. Battery Packs include mounting base.
  • Fan Kit; which includes micro fan, TO-92 Temperature sensor and mounting hardware
  • Terminal Block Add-on Board; with A/D Converter, Voltage Follower & 12V RS232 Interface
  • UPS PIco Case

Downloads & Installation Guides

UPS PIco Wiki

Write a review

Name

Your Review

Note: HTML is not translated!

Rating

Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.