Be the first to ask a question.
The BerryClip Plus is an enhanced version of the popular BerryClip
add-on board. It is a simple, cheap and easy to use addition to the Raspberry Pi. It plugs directly onto the Pi’s GPIO header and provides 6 coloured LEDs, 1 Buzzer, 2 Switches and a 13 pin header. It can be controlled using any programming language that can manipulate the GPIO pins and this includes Python and C.
The BerryClip Plus is red, has an additional switch and a 13 pin header which exposes a row of GPIO pins that would otherwise be unusable! The enables the addition of extra sensors, such as a PIR
motion detector, and switches for more elaborate projects!
The BerryClip Plus Features:
- Easy assembly with a little soldering, comes as a kit.
- Example Python scripts
- No cables required
- Extra switch and 13-way GPIO access header
- Kit Contents
- Red PCB
- 1 x 26-way header
- 1 x 13-way header
- 2 x Red LEDs
- 2 x Yellow LEDs
- 2 x Green LEDs
- 1 x Buzzer
- 2 x Switches
- 6 x 330 Ohm Resistors
- 2 x 1K Ohm Resistors
- 2 x 10K Ohm Resistors
- 1 x Rubber Bumper
BerryClip Plus Assembly and User Instructions