My Account

Wish List (0)

Saved Carts

Compare

Approved Re-Seller
Follow us on Facebook! Follow us on Twitter! Follow us on Instagram!

FREE UK DELIVERY ON ORDERS OVER £50 ex.VAT (T&C's APPLY)

WiFi Dongle - Nano USB

Compatible With:

Raspberry Pi - Model A
Raspberry Pi - Model B
Raspberry Pi - Model B+
Raspberry Pi - Model A+
Raspberry Pi 2 - Model B
Raspberry Pi 3 - Model B

Product Code: MMP-0027

£5.99
Ex.Tax £4.99

Qty:

ADD TO BAG

In Stock: 414

WiFi Dongle - Nano USB
WiFi Dongle - Nano USB
WiFi Dongle - Nano USB
Installing the Wireless USB 11N Nano Adaptor 802.11N (WiFi Dongle) Installing the Wireless USB 11N Nano Adaptor 802.11N (WiFi Dongle) Sep 18, 2012 Please Note. These instructions are outdated. The Raspberry Pi has drivers for Realtek 8188CU chipsets included as default. Devices using this chipset shou..
How to Set Up the Ralink RT5370 WiFi Dongle on Raspian How to Set Up the Ralink RT5370 WiFi Dongle on Raspian Jun 13, 2013 1. Make sure you have the latest Raspbian Operating System (OS) installed on your Raspberry Pi. You can download the latest version of NOOBS here and follow ..
Disable Wifi Power Management Disable Wifi Power Management Jan 12, 2015 If you are experiencing drop outs on your wifi interent connection, it could be that your dongle is turning itself off after an idle period. To stop your wifi d..

Specially manufactured by ModMyPi for the Raspberry Pi, this plug and play wireless USB 11N nano wifi dongle will get your Raspberry Pi hooked up to the internet wirelessly within seconds! The unit uses the plug and play Ralink RT5370 Chipset, which requires no set up or installation on Raspian, XBMC or OpenElec, and features an integrated micro antenna to give you clear and constant WiFi signal.

Unlike ordinary wireless networking technologies that are confused by signal reflections, the 802.11n’s MIMO (Multi Input, Multi Output) actually uses these reflections to increase 4 times range of 802.11g and reduce "dead spots" in the wireless coverage area. It complies highly with IEEE802.11g/IEEE802.11b standard, but when both ends of the wireless link are Wireless-N, the speed can be increased even 3 times of 802.11g by using twice as much radio band.

This nano WiFi dongle utilises the Ralink 5370 Chipset.

Features:

  • Tiny Nano Dongle!
  • Can be powered direct from the Raspberry Pi or from a powered hub.
  • Tested for Compatibility with the Raspberry Pi
  • Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards
  • Provides USBv2.0 port
  • Provides max. 150Mbps receiving rate and 150Mbps sending rate
  • Supports 20MHz/40MHz frequency width
  • Supports AP mode
  • Auto-detects and changes network transmission rate
  • Provides two work modes: Infrastructure and Ad-Hoc
  • Supports PSP, WII and NDS connecting to Internet and Xlink Kai
  • Supports 64/128-bit WEP, WPA/WPA2 encryption methods and 802.1x authentication standards
  • Supports WPS (Wi-Fi Protected Setup) encryption method to free you from remembering long passwords
  • Supports WMM to make your voice and video more smooth
  • Storage Humidity 5% ~ 90% RH non-condensing
  • Operating Humidity 10% ~90% RH non-condensing
  • Sensitivity 68dbm(N mode150M, rich value);70dbm(G mode 54M);88dbm(B mode 1M)
  • EVM 68dbm
  • Transmission Power 15dbm
  • Frequency Range 2.4MHz
  • IEEE 802.11 Standards Supported 11b,11g,11n

Tutorials

How To Install  Wifi Dongle On The Raspberry Pi 

Datasheet

Ralink 5370 iw list output

Reviews about WiFi Dongle - Nano USB
Average rating: 47 reviews
  • Overall5
  • Quality5
  • Price5
  • Usability5
Total reviews: 47
Write your own review on this product.
Write review
Sort By 

Write a review

Name:


Your Review:
25-3000 characters
Note: HTML is not translated!

Rating:
Overall
Quality
Price
Usability
Add prosAdd cons

are you happy?

please confirm the selections below are correct

YES
CHANGE

Offensive
Foul Language
Irrelevant
Other (write below)