My Account

Wish List (0)

ModMyPi - Pi Zero Camera Box

Product Code:MMP-0399

Ex.Tax £10.79

Availability: 100

ModMyPi - Pi Zero Camera Box
ModMyPi - Pi Zero Camera Box
ModMyPi - Pi Zero Camera Box
ModMyPi - Pi Zero Camera Box
ModMyPi - Pi Zero Camera Box
Questions3 Answers3 | Expand All
Does it work with Pi Zero WH?
does it fit if there is the GPIO header soldered (WH)?
  • I'm afraid not. The Pi Zero will only fit if the header is soldered to the underneath of the Pi, or without a header all together.
    ModMyPi LTD
    Was this answer helpful? 0
Can the V1.3 Mini Camera be fitted
Hi, I have couple of Pi Zero V1.3 Mini Cameras. Can any of the Pi Zero cases be adapted to fit these cameras? Thanks
Dave Daniel
  • Unfortunately not due to the lack of mounting points.
    ModMyPi LTD
    Was this answer helpful? 0
Is the case waterproof?
Is the case waterproof? I need to mount my pi outside.
  • I'm afraid not
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 3 of 3 (1 pages)

The 'ModMyPi Pi Zero Camera Box' is designed for hosting the Raspberry Pi Zero computer and a Pi Camera module together in a compact and versatile enclosure.

Compatible with both the original V1, V2 Raspberry Pi camera module and V2 Noir camera module!

Please Note. Camera modules & cases require a Pi Zero Camera Cable to enable use with the Raspberry Pi Zero!

This all-integrated design ensures that the camera's fragile ribbon cable doesn't get damaged while exposed during operation.

This case can accommodate an optional magnetic camera lens (shown on most of the photos), which opens up new possibilities above and beyond the outstanding optical quality of the Pi Camera module. The lens guide on top of the case ensures easy centering of the optional lenses (the lens guide is optional, and can be omitted if you're not using optional lenses).

The black matte case is opaque, ensuring that the red led mounted on the Pi Camera module will not affect the ambient light captured by the camera.

The back of the 'Pi Camera Box' can accept an optional wall-mounting bracket for permanent installations.

The flexibility of this design is ideal for using a Raspberry Pi and its camera module in a variety of applications such as security with a wide angle fish-eye lens, process monitoring, computer vision, high-definition time lapses, motion sensing and many other fun projects. The case is tall enough to welcome heat sinks.

Lens and wall mount sold separately.


  • Black matte acrylic
  • Assembly time: about 10 minutes
  • Access to all of Pi's connectors
  • Features rear GPIO access
  • Works with Raspberry Pi Zero
  • Outer dimensions: 88mm x 50mm x 26.5mm
  • Inner dimensions: 74mm x 36mm x 20.5mm (may vary due to thickness variations on acrylic plates)
  • 4x rubber feet

ModMyPi Pi Zero Camera Box Assembly Instructions

Write a review


Your Review

Note: HTML is not translated!


Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.