My Account

Wish List (0)

ModMyPi - Pi Camera Box Bundle (Case, Lens & Wall Mount) - Zero

Product Code:MMP-0354

Ex.Tax £18.33

Availability: 167

ModMyPi - Pi Camera Box Bundle (Case, Lens & Wall Mount) - Zero
ModMyPi - Pi Camera Box Bundle (Case, Lens & Wall Mount) - Zero
ModMyPi - Pi Camera Box Bundle (Case, Lens & Wall Mount) - Zero
ModMyPi - Pi Camera Box Bundle (Case, Lens & Wall Mount) - Zero
ModMyPi - Pi Camera Box Bundle (Case, Lens & Wall Mount) - Zero
ModMyPi - Pi Camera Box Bundle (Case, Lens & Wall Mount) - Zero
Questions4 Answers4 | Expand All
length of the camera cable
I have purchased the case but my camera did not come with a cable for the the pi zero. what length do I need
Can a heat sink fit?
Is there room for a Pi Zero processor heat sink or does the camera interfere with installing a heat sink?
  • Unfortunately the camera module would foul on the heat sink
    ModMyPi LTD
    Was this answer helpful? 0
different lense
Hi could a swap which lens came with this set?
Oli Redmond
  • Unfortunately not, these kits come pre-bundled with the fisheye lens. If you would like a different lens, we have a vararity available:
    ModMyPi LTD
    Was this answer helpful? 0
Is there any support to fix an infrared led?
Is there any support to fix an infrared led? I haven't seen any
  • Unfortunately not. There is a slot down the side of the case to allow GPIO access, so you could mount it externally.
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 4 of 4 (1 pages)

New for the Raspberry Pi Zero! This bundle includes a specially designed black matte Zero Pi Camera Box Case, a Magnetic Fish-Eye Lens and Camera Box Wall Mount.

Compatible with both the original V1, V2 Raspberry Pi camera module and V2 Noir camera module!

Please Note. Camera modules & cases require a Pi Zero Camera Cable to enable use with the Raspberry Pi Zero!

The flexibility of this design is ideal for using a Raspberry Pi and its camera module in a variety of applications such as security with a wide angle fish-eye lens, process monitoring, computer vision, high-definition time lapses, motion sensing and many other fun projects.

 Pi Camera Box Case

The 'ModMyPi Pi Camera Box' is designed for hosting a Raspberry Pi Zero computer and a Pi Camera module together in a compact and versatile enclosure. This all-integrated design ensures that the camera's fragile ribbon cable doesn't get damaged while exposed during operation. This case can accommodate an optional magnetic camera lens, which opens up new possibilities above and beyond the outstanding optical quality of the Pi Camera module. The black matte case is opaque, ensuring that the red led mounted on the Pi Camera module will not affect the ambient light captured by the camera. The back of the 'Pi Camera Box' can accept an optional wall-mounting bracket for permanent installations. The case has an additional cut-out at the back allowing access to those all so precious GPIO pins!
  • Black matte acrylic
  • Assembly time: about 10 minutes
  • Access to all of Pi's connectors
  • Rear cut-out for GPIO access
  • Dimensions: 44mm x 89mm x 26.5mm
  • 3mm thick black acrylic case
  • 4x rubber feet

Camera Box Wall Mount

The Raspberry Pi Camera, enclosed with the Pi in the Camera Box, and equipped with a fish eye lens, is a very capable surveillance and monitoring system that is easy to connect and program. To make the most of it, the Pi Camera box should be steadily mounted to a wall or a ceiling and should be properly angled. This bracket allows tilting and swiveling of the device. Just tighten the thumb screws when you have found the right position and you're done.


  • Bracket max. weight: up to 3.5kg (7.7 lbs)
  • Wall / ceiling mounting screws
  • Tilt angle: -24° to +15°
  • Swivel angle: ~75° left and right
  • Thumb screws for easy angle adjustments

Magnetic Fish-Eye Lens

The Raspberry Pi's camera offers great features out-of-the box, which can be enhanced by adding interchangeable lenses. The fish-eye lens will give your Raspberry Pi camera a panoramic view of its surroundings, making it perfect for surveillance, security and general monitoring scenarios. The Pi Camera Box is designed to receive the small metal ring needed for binding the magnetized fish-eye lens to the case.


  • Magnetic fish-eye lens
  • 180 degree angle (see note below)
  • Self-adhesive metal ring mount
  • Plastic lens cap
  • Key-chain attachment


Pi Camera Box Assembly Instructions

Write a review


Your Review

Note: HTML is not translated!


Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.