ModMyPi Modular RPi 2/3 Case (White)
ModMyPi Modular RPi 3+ Case white available for branding?
Is this ModMyPi Modular RPi 3+ Case white available for branding?
Need to have extra height to accommodate large heat sinks, fans, PiJuice internal lithium battery.
Any chance for HyperPixel 4 in screen?
If not HyperPixel 4 in screen adapter, can I use my 3D printer to custom make a plate for HyperPixel 4 in screen and attach this to the ModMyPi Modular Branding RPi 3+ case? If so, where would the Branding be located on this?
Thanks,
Bob
-
Customisation is currently only available on the Black Modular Case, and the White Modular Case.
No we don't have a hyperpixel adaptor. You could probably come up with something on the 3D printer, depends how good your designs skills are I guess :)
Branding is printed on the LID of the case only, as shown in the product picture - https://www.modmypi.com/raspberry-pi/cases-183/customisation/raspberry-pi-case-branding-and-customisation
Was this answer helpful?
Additional case dimensions
Is is possible to get a mechanical drawing with additional case dimensions (in addition to the few available in the manual)? If not, would it at least be possible to get the dimension from the top of the RPi board to the top of the USB/HDMI/audio accessory cutout?
Showing 1 to 2 of 2 (1 pages)
Introducing ModMyPi's New Case for the Raspberry Pi B+
Jul 13, 2014
Introduction
With the new B+ board revision, the Raspberry Pi Foundation solved a number of minor issues and criticisms that were expressed about the origina.. New Updated Version - Compatible with both Raspberry Pi 2 and 3 with Dual Light Pipes! The ModMyPi Modular Raspberry Pi case!
Our new deluxe Raspberry Pi 2/3 Model B case is a fully customisable and adaptable modular unit aimed to suit a range of Raspberry Pi applications. Designed with a stealth look and integrated LED lights pipes, it’s the perfect accessory to any Raspberry Pi enthusiast’s tool kit!
The Modular Case comes equipped with a range of customisable modular features including optional optical window, stackable 10mm spacer plates, micro SD card cover, dual-use USB & HDMI security shroud, secure screw locking, VESA adaptors, and internal SD card holder.
Spacer plates are designed to be stacked up to 5 spacers high, so you can grow your Pi case with your project! Additional Screws are Required for more than 1 Spacer.
The ModMyPI Modular RPi Case Features:
- Raspberry Pi 2/3 Model B and B+ Two Part (Lid & Base) Plastic Case
- LED Status Light Pipes
- Stealth Streamlined Look - Spouse Tested & Confirmed
- Clip Fit Raspberry Pi Mount with Optional Screw Locking (Included)
- Positive and Secure Case Locking via Screws (Included)
- Designed for Hacking - Extra Large Internal Room for Breakout Boards
- Airflow - Internal Volume Perfect for Adding Heat Sinks & Keeping your Pi Cool
- GPIO 40 Pin Ribbon Cable Slot
- CSI Camera Cable Cable Slot
- DSI LCD Video Cable Slot
- GPIO Fly-Through Cable Slot for Smart Power Supply Switches
- Additional Internal SD Card Holder
- In-Built Four Point 50mm M3 Mount & Two Point 40mm M3 Wall Mount Features
- Matt Finish Body with Gloss Cap
- Optical See-Through Window (Clear Version Only)
- Available in a Range of Colours Including Black, Blue, Clear, White and Raspberry
- Designed in the UK
- Strong & Durable ABS Plastic
-
Case Dimensions:
- Length: 104.95mm
- Width: 74.95mm
- Height: 36.00mm
-
Internal Dimensional Volume for Breakout Boards:
- Length: 90.00mm
- Width: 58.50mm
- Height*: 25.70mm (*Measured from Top of RPi PCB to Internal Top of Lid)
- Internal Volume HAT Compliant
Modular Add-On Options Include the Following:
- Micro SD Card Cover
- Flush, Lockable and Tamper-Proof.
- Secure your Micro SD Card from Probing Fingers
- Protect your Micro SD Card from Accidental Knocks & Bangs
- 10mm Stackable Spacers
- Makes Your Case Compatible with 99% of Breakout Boards
- Spacers Raise Internal Height by 10mm Enabling the Case to Grow with your Project
- Spacers can be Stacked Increasing Internal Height by up to 50mm or more!
- Great for Embedded Applications, and Hobbyist Projects
- USB & HDMI Security Cover
- Dual-Use - Compatible with Either Set of I/O Ports e.g. HDMI or USB Side
- Secure and Tamper-Proof
- RJ45 & Micro USB Power Breakout Hatches
- Off-Set to Enable the Use & Internal Protection of up to 4 Nano USB Dongles!
- VESA Mounts
- Two Types Available Depending on VESA Spacing
- VESA Splash Enables the use of MIS-D 75/100 M4
- VESA Slice Enables the use of MIS-F 200mm M6
- Great for Media & Signage Applications e.g. Hiding the Pi behind the TV!
Downloads
