My Account

Wish List (0)

HighPi Raspberry Pi B+/2/3/3B+ Case - Clear

Product Code:MMP-0787

£10.00
Ex.Tax £8.33

Availability: 52

HighPi Raspberry Pi B+/2/3/3B+ Case - Clear
HighPi Raspberry Pi B+/2/3/3B+ Case - Clear
HighPi Raspberry Pi B+/2/3/3B+ Case - Clear
HighPi Raspberry Pi B+/2/3/3B+ Case - Clear
Questions3 Answers3 | Expand All
Fit for Nanomesher Hackable Pi Switch Cap
Is this case suitable for Pi with the Nanomesher Hackable Pi Switch Cap?
deLeeuw
  • I'm afraid not. It isn't quite tall enough. When placing the lid of the case on, it presses the button on the CAP.
    ModMyPi LTD
    Was this answer helpful? 0
Will this fit PiPoe HAT?
will this case fit the pipoe hat from pi supply? i dont mind small mods, but correct height is essential.
simon
  • We don't currently have the PoE in stock, so I'm unable to check. However, I think height wise, you should be fine. You will need to mod the case though to get access to the two RJ45 ports on the PoE HAT.
    ModMyPi LTD
    Was this answer helpful? 0
¿Logo on the case?
I bought this case previously, and it had a logo on the top. For future orders... Is it possible that the case does not have a logo? Moreover, if possible... Could I choose a custom logo for the case instead of the one I received?
Rubén
  • We can only offer what the manufacture supplies us :) In this instance the case comes with a logo, so thats how it comes.
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 3 of 3 (1 pages)

Tall enough to host a wide range of add-on board and slim enough to look cool, the HighPi case sets a new standard for ease of use and versatility. It's just a fraction of an inch taller than most of the “standard” cases, but designed to perfectly host many add-on boards like HiFiBerry DAC+. The HighPi is designed and made in Canada from high quality ABS material. 

Installing or removing the Raspberry Pi board is astonishingly quick, simple, and secure; all without tools or assembly. One snap action locks the Pi board into the case; the second secures the lid, rattle free. Remove the Pi board and the lid with one-finger-releases for each. Genius!

Whether you’re running a plain Raspberry Pi B+/2/3/3B+ board or modding it to the max, the HighPi case has your Pi covered. Generous internal room allows HATs, break-out boards, or heat sinks. Vents on three sides double as fly-through cable ports for the GPIO and whatever else you need to connect to. A two-section break-out allows you to choose how much of the A/V side of the case to open up for connectors on attached boards.

This case is one of the first to perfectly accommodate the full line of HiFiBerry audio boards. Use one break-out section for DAC+ and Digi+, and both for the Amp+. There is generous clearance around the RCA connectors for bulky, high-end cables. Achieve the sound you want in a clean case design that fits right, right away.

The HighPi PI2B case can be wall mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case. When wall mounted horizontally, the A/V and audio cables hang downward from the Pi, improving visual tidiness and reducing the need for support of heavy cables.

HighPi Rasberry Pi Case Features:

  • Durable two part ABS plastic case
  • Industry-leading ease of use, easy and tool free
  • Large internal volume for HATs, break-out boards, or heat sinks
  • Vents on three sides double as fly-through cable ports
  • Two-section breakout on A/V side for break-out board I/O
  • Micro SD card access port
  • Mounting option 1: two M3.5/M3/#6 screws slide into wall mounts for easy removal, horizontal orientation with A/V side down, 40mm spacing
  • Mounting option 2: four M3.5/M3/#6 screws through feet from inside for secure mounting in any orientation, 68.3 x 38.8mm spacing
  • Self-adhesive feet included, quantity 4
  • Matte finish hides fingerprints
  • Available in black, red or clear. Order two and mix lids!
  • External dimensions: 96 x 66 x 41mm
  • Internal volume for breakout boards:
    • Length – 90.0mm
    • Width – 60.0mm
    • Height – 28.8mm (from top of PCB to underside of lid)

Write a review

Name

Your Review

Note: HTML is not translated!

Rating

Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.