My Account

Wish List (0)

Raspberry Pi Camera Board - Night Vision (5MP)

Product Code:MMP-0665

£19.99
Ex.Tax £16.66

Availability: 35

Raspberry Pi Camera Board - Night Vision (5MP)
Raspberry Pi Camera Board - Night Vision (5MP)
Raspberry Pi Camera Board - Night Vision (5MP)
Raspberry Pi Camera Board - Night Vision (5MP)
Raspberry Pi Camera Board - Night Vision (5MP)
Questions2 Answers2 | Expand All
Camera cable included?
Is the camera cable included? If not, please tell me the number of this part so I can complete my order.
Erich
  • Camera cable is included.
    ModMyPi LTD
    Was this answer helpful? 1
IR leds turn on/off automatically?
Do the IR leds turn on automatically as the night falls, and turn off at dawn? Or do they have to be controlled by GPIO?
Koen
  • There is a little light sensors on each of the IR boards that control the LEDs. The less light detected the more the IR LED is illuminated. You can control the threshold at which the IR LEDs start to turn on by adjusting the tiny potentiometer on each of the IR boards.
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 2 of 2 (1 pages)

What does the fox say? You'll probably never know, but at least we can see what that pesky fox is up to with this Raspberry Pi Night Vision Camera! 

Our Raspberry Pi Night Vision Camera plugs directly into the CSI connector on the Raspberry Pi, and features two high intensity Infrared LED spotlights for night time recording! The IR LED's are powered directly from the CSI port, and are capable of lighting an area at a distance of up to 8m! In testing, the best images were captured at a distance of 3m to 5m.

This Raspberry Pi night vision camera uses the same OV5647 as the standard Raspberry Pi camera, and is therefore able to deliver a crystal clear 5MP resolution image, or 1080p HD video recording at 30fps!

Features:

  • Raspberry Pi Night Vision Camera. Compatible with all revisions of the Raspberry Pi
  • 5 Megapixel OV5647 Camera
  • 2 x 3W high-power 850 infrared LEDs:
    • Onboard photoresistor to detect ambient light
    • Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
  • Camera specifications
    • CCD size : 1/4inch
    • Aperture (F) : 2.9
    • Focal Length : 3.29MM
    • Diagonal : 72.4 degree
    • Sensor best resolution : 1080p
  • 4 screw holes
    • Used for attachment
    • Provides 3.3V power output
    • Supports connecting infrared LED and/or fill flash LED
  • Dimension : 25mm x 24mm x 6mm

Waveshare WiKi

Write a review

Name

Your Review

Note: HTML is not translated!

Rating

Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.