Be the first to ask a question.
Set up Guide
Step1 : Connect the end of attached coaxial cable to the ANT/IN connector on the TV HAT (or Digital Converter Box) and plug the USB plug into the USB port of the TV or the Raspberry Pi.
Step 2 : Hold the antenna near the window, placing it horizontally or vertically.
Step 3 : In the TV’ s or STB ’ s setup menu, set the tuner mode to “ Antenna” or “Air” , for more detailed instructions, please refer to your TV manual.
Step 4 : In the TV’ s or STB ’ s setup menu, set TV to “scan” for channels. This can sometimes be listed as auto-program,auto-scan,channel search or channel scan. Consult the TV manual or detailed instructions.
Step 5 : If reception is sporadic, try moving the antenna to another location and re-scanning the TV until optimal position is found.
Please Note. The antenna works best when placed near to or on a window at a high level, and will require positioning for best reception. Local interference from high power devices could could loss of reception. Indoor use only.
1 x Indoor Digital TV Antenna
1 x Signal Amplifier
1 x Universal Connector
1 x User Manual
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.