My Account

Wish List (0)

HiFiBerry Amp2

Product Code:MMP-1083

Ex.Tax £45.83

Availability: 32

HiFiBerry Amp2
Questions2 Answers2 | Expand All
Will the amp2 drive two 12 ohm speakers
  • Not optimally, no.

    This amp is capable of driving a pair of 4-8 Ohm speakers

    ModMyPi LTD
    Was this answer helpful? 0
Which pins are used for sound?
Which pins are used by this? I2c? SPI? i2s?
  • I2S
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 2 of 2 (1 pages)

The HiFiBerry Amp2 is a high-quality, highly efficient Class-D power amplifier for the Raspberry Pi (newer models with 40 pin GPIO connector), that is mounted onto the Raspberry Pi to create a stereo audio system. The speakers just have to be connected directly, which makes it an ideal module for multi-room audio installations.

Please Note

  • This does not include the external 12-24V power supply that is needed to operate the HiFiBerry Amp and the Raspberry Pi. You can purchase one here.
  • It powers the Raspberry Pi, there is no need to add an external 5V power supply to the Raspberry Pi. However if you want to use power-hungry USB components you need to use a powered USB hub.
  • You can’t connect the power to the Micro-USB port of the Raspberry Pi. The whole system including the Raspberry Pi will be powered from the external 12-18V power supply


  • Up to 60W output power
  • Capable of driving a pair of 4-8 Ohm speakers
  • Fully controllable from the Raspberry Pi • sample rates up to 192kHz
  • Digital-analog conversion included, no need for external DACs or sound cards
  • Digital sound transmission for optimal audio performance
  • Connects directly to the Raspberry Pi A+/B+/2B/3B/Zero, no additional cables needed
  • Only one 12-24V external power supply needed for both AMP2 and the Raspberry Pi, no need for USB power supply anymore
  • No soldering required, the AMP2 is directly mounted on the Raspberry Pi A+/B+/2B/3B in less than a minute
  • Dimensions without package 5.5 x 6.5 x 2.5 cm
  • Dimensions including package 9 x 7 x 3 cm
  • Weight 0.06 kg

Raspberry Pi compatibility: Note that the HiFiBerry Amp2 works only with the newer Raspberry Pi model A+ and B+,2, 3, not with the older model A/B.

Write a review


Your Review

Note: HTML is not translated!


Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.