My Account

Wish List (0)

Dynamode 2.5" Hard Drive SATA to USB Enclosure

Product Code:MMP-0179

£4.99
Ex.Tax £4.16

Availability: 17

Dynamode 2.5" Hard Drive SATA to USB Enclosure
Dynamode 2.5" Hard Drive SATA to USB Enclosure
Questions2 Answers2 | Expand All
Chipset
Can you tell me which chipset this enclosure uses? I have a problem with my current enclosures where the drive always spins down after 3 minutes, despite my changing the settings. If you tell me which chipset I can then google it and check. TIA
Andrew Pattison
  • This uses the MA6116A chip
    ModMyPi LTD
    Was this answer helpful? 0
Cable to connect it to the Pi
Hi, does this come with a cable to connect the enclosure to the Pi? If not, what kind of cable does it need? It's not really clear from the picture
Kuldip Rai
  • It does indeed come with the required cable to connect to a Pi. The cable is USB-A to USB-A.
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 2 of 2 (1 pages)
The Dynamode 2.5" External SATA to USB Enclosure has been tested for compatibility on the Raspberry Pi! The device is compatible with SATA drives, and converts the signal to USB, so it's a great solution to cheap Raspberry Pi storage if you have a spare or old hard drive that you want to connect via USB! Please Note. This is a hard drive caddy/enclosure, a hard drive is NOT included.
 
For best results, we recommend that you connect any hard drives via a USB Hub, which will ensure the stability of your system. Setup is simple and straightforward; simply connect the single USB cable to a spare USB port and follow our short tutorial on how to install an external hard drive on the Raspberry Pi. The drive is powered from the USB cable, we've tested it with the Raspberry Pi on both Raspian and XBMC, and had no problems at all!
 
Features:
  • Stylish & Compacy Aluminium Design
  • Includes leather carry case & all cables required for installing hard drive
  • Perfect for re-using old harddrives for your Raspberry Pi project!
  • Compatible with 2.5" SATA Hard drives
  • Compatible with Raspberry Pi (tested on OpenElec, Raspian & XBMC)
  • Powered via USB (we recommend you use a USB Hub)
  • Transfer Interface: USB 2.0
  • Transfer Rate: 480Mbps Max
  • Working Temp: - 40 to 65 Degrees Celcius
  • Height:  18mm
  • Width:  80mm
  • Length:  140mm
  • Weight: 0.26k
  • Manufacturer Product Page
  • Manufacture Part No. USB-HD2.5S

Tutorials

How to install a Hard Drive on Raspian

Write a review

Name

Your Review

Note: HTML is not translated!

Rating

Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.