My Account

Wish List (0)

Onion Power Dock

Product Code:MMP-0681

£13.00
Ex.Tax £10.83

Availability: 8

Onion Power Dock
Onion Power Dock
Onion Power Dock
Onion Power Dock
Questions2 Answers2 | Expand All
Which battery can be used ?
What characteristics the battery need to have ?
Hugues
  • Needs to be a 3.7V LiPo
    ModMyPi LTD
    Was this answer helpful? 0
What are the physical dimensions of the dock?
Size in units of millimetres for length (longest) x breadth x depth (thickness) Weight in grams (Trying to work out if I need to build a charging circuit or not. Thanks!)
Karl
  • 74.5mm x 45.5mm x 9.5mm
    Weight: 54g
    ModMyPi LTD
    Was this answer helpful? 0
Showing 1 to 2 of 2 (1 pages)

The Power Dock allows you to use any 3.7V LiPo battery to power your Omega and then charge the battery when it’s out of juice. It has the same form factor as the Expansion Dock and can also be used in the same way: no battery and receiving power through the Micro USB port. The Dock breaks out the Omega’s GPIO pins so you can use them to control external circuits or connect Expansion boards to extend the functionality of your Omega.

The Power Dock frees you from wires and allows you to take all of your Omega projects on the go! Onion strongly recommend getting a Dock for your Omega to get the best experience and most performance, functionality, and stability from your device. 

Mobility

Use any 3.7V LiPo battery (not included) to provide power to the Omega and all connected Expansions and USB devices. Display the battery’s charge level on four battery indicator LEDs. When your battery is out of juice, plug a short Micro USB cable (8" or less is recommended) and the Power Dock will charge the battery.

Convenience

No battery? No problem! Without a battery connected, the Power Dock behaves almost like the Expansion Dock. You can provide power with a short Micro USB cable and the regulator circuits on the Dock will ensure the Omega always receives the stable 3.3V it needs to operate optimally.

Note that the Power Dock does not have include USB-to-Serial chip, so you will need to use SSH or the Console over WiFi to connect to your Omega. See the links below on how to do this.

Functionality

The Dock exposes several of the Omega’s features to the user:

  • The Omega’s GPIOs are exposed on the Expansion Header. Use the header to plug in Onion Expansions or connect to external circuits
  • Connect USB devices directly to your Omega
  • Control the RGB LED on the Dock using the Omega’s GPIOs
  • Press the Reset Button to reboot your Omega, hold it for 10 seconds to perform a factory restore
  • Turn your Omega on and off with the Power Switch

Modular

Compatible with all Omega Expansions. Extend the functionality of your Omega by connecting one of our plug and play Expansions.

Technical Details

  • 1x JST-PH LiPo Battery Connector
  • 1x Micro USB Port – Power and Battery Charging
  • 1x USB-A Port – Connect USB devices to the Omega
  • 1x Reset Button
  • 1x Power Switch
  • 30-pin Expansion Header

Links

Downloads

Onion Omega2 Documentation

Write a review

Name

Your Review

Note: HTML is not translated!

Rating

Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.