My Account

Wish List (0)

ModMyPi's Blog ModMyPi's Blog Feed


Written by in Tutorials on

In this tutorial, we will show you how you can boot your Raspberry Pi using a USB port instead of the micro-SD card slot! Please note: This method of booting is experimental and is not guaranteed to work with all USB mass storage devices. If you are using a Raspberry Pi 3 – Model B+ or Raspberry Pi 3 – Model A+ then you can skip to the second section of this tutorial “Preparing the...

0 Comments

Written by in Getting Started! on

Guide to getting started with the new ModMyPi Jam Hat. Use Python and the GPIO Zero library to start making LEDs blink, buzzers buzz and buttons click to make your Jam Hat come alive!

0 Comments

Written by in Information on

The Jam Hat is here! The ideal board to get you started programming with the Raspberry Pi and GPIO Zero and great for Raspberry Jams, read on to find out more about the board...

0 Comments

Written by in Getting Started! on

Raspberry Pi Comparison Table With so many Raspberry Pi's to choose from, it can all be a bit confusing! So, we've put together a handy table to help you decide!  If you're a new user, and your question is "which is the newest Raspberry Pi?" you really have just three options. The Raspberry Pi 3 Model B+, which is by far the fastest, most user friendly and most forgiving Pi. The Raspberry Pi...

0 Comments

Written by in Assembly Instructions on

The laser-cut parts of the case are protected by an adhesive film which needs to be removed before assembly. Bill of Materials Raspberry Pi 3 A+ Raspberry Pi PoE HAT Case 6x Acrylic Pieces 4x M2.5 x 4mm M/F Stand Offs 4x M2.5 x 9mm F/F Stand Offs 4x M2.5 x 11mm M/F Stand Offs 8x M2.5 Black Screws NOTE: Acrylic is a hard and stiff plastic which is sensitive to stress concentrations...

0 Comments

Written by in Assembly Instructions on

The laser-cut parts of the case are protected by an adhesive film which needs to be removed before assembly. Bill of Materials Raspberry Pi 3 A+ Raspberry Pi 3 A+ VESA Case 6x Acrylic Pieces 4x M2.5 x 8mm M/F Stand Offs 4x M2.5 x 20mm F/F Stand Offs 8x M2.5 Silver Screws NOTE: Acrylic is a hard and stiff plastic which is sensitive to stress concentrations and shares a certain level of...

0 Comments

Written by in Assembly Instructions on

The laser-cut parts of the case are protected by an adhesive film which needs to be removed before assembly. Bill of Materials Raspberry Pi B+/2/3 Raspberry Pi Touch Screen Raspberry Pi Touch Screen Case 6x Acrylic Pieces 6x M3 x 30mm F/F Stand Off 6x M3 x 7.5mm M/F Stand Off 6x M3 x 6mm Black Screw 10x M3 x 6mm Silver Screw 1x M3 Nut 4x Adhesive Rubber Feet NOTE: Acrylic is...

0 Comments

Written by in Tutorials on

How to use the TCRT5000 IR line follower sensor with the Raspberry Pi

0 Comments

Written by on

Tired of having your Mince Pies nabbed at Christmas? Want to keep an eye on when Santa delivers his presents and eats the mince pie you leave out? Then look no further than Project Mince Spy.

0 Comments

Written by on

Getting started with the ModMyPi Christmas Tree Star. Dive into our festive tutorial and complete your tree this year with a Raspberry Pi controlled star shaped LED panel which can be used with the GPIO Zero library.

0 Comments

Written by on

Find out what's new in the Raspberry Pi 3 Model A+...

0 Comments

Written by in Tutorials on

Make your own firework display for indoors with the Raspberry Pi Sense Hat and a bit of Python magic...

0 Comments

Written by in Tutorials on

Set up your Raspberry Pi to receive TV signals using OSMC and the new Raspberry Pi TV HAT. Follow our tutorial and get watching TV with your Pi.

0 Comments

Written by in Tutorials on

How do you get your Raspberry Pi to run a small Python script on boot? Find out how to use Gnome Schedule with the Raspberry Pi.

0 Comments

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.