My Account

Wish List (0)

Saved Carts

Compare

March 09, 2017

The mini-HDMI port on the Raspberry Pi Zero sits a few mm back from the edge of the case on the Official Raspberry Pi Zero Case. This means that some mini-HDMI cable will not seat correctly into the mini-HDMI port on the official case (depending...

February 14, 2017

The laser-cut parts of the case are protected by an adhesive film which needs to be removed before assembly. Bill of Materials Raspberry Pi B+/2/3 Itead GSM Breakout Board 8x Acrylic Pieces 4x M2.5 x 8mm M/F Stand Off 4x M2.5 x...

February 10, 2017

The laser-cut parts of the case are protected by an adhesive film which needs to be removed before assembly. Bill of Materials Raspberry Pi B+/2/3 Adafruit 16x2 LCD Kit 7x Acrylic Pieces 4x M2.5 x 8mm M/F Stand Off 4x M2.5 x 5mm...

January 19, 2017

The laser-cut parts of the case are protected by an adhesive film which needs to be removed before assembly. Bill of Materials Raspberry Pi Zero 6x Red Acrylic Pieces 8x M2.5 x 4mm M/F Stand Offs 4x M2.5 x 16mm F/F Stand Offs 8x...

January 19, 2017

The laser-cut parts of the case are protected by an adhesive film which needs to be removed before assembly. Bill of Materials Raspberry Pi B+/2/3 6x Red Acrylic Pieces 4x M2.5 x 18mm M/F Stand Offs 4x M2.5 x 8mm M/F Stand...