My Account

Wish List (0)

Standard servo - TowerPro SG-5010 - 5010

Product Code:ADA-0155

£11.99
Ex.Tax £9.99

Availability: 4

Standard servo - TowerPro SG-5010 - 5010
Standard servo - TowerPro SG-5010 - 5010
Standard servo - TowerPro SG-5010 - 5010

Be the first to ask a question.

This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box. Comes with 3 horns, as shown. They aren't the highest quality servo (which is why they are less expensive) and so are not suggested for hobby planes. We now carry the Tower-Pro SG-5010.

To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left.

Technical Details:

  • Power: 4.8V - 6V DC max (5V works well)
  • Average Speed: 0.2sec/60degree (@ 4.8V), 0.16sec/60degree (@ 6V)
  • Weight: 39g (1.37 oz)
  • Torque: At 5V, 5.5kg-cm / 76oz-in, and at 6V 6.5kg-cm / 90oz-in.
  • Size mm: (L x W x H) 40 x 20.0 x 38 mm
  • Size in: (L x W x H) 1.60x.79x1.50
  • Spline Count: 25

Write a review

Name

Your Review

Note: HTML is not translated!

Rating

Bad           Good

are you happy?

please confirm the selections below are correct

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.